O2k-NO Amp-Module

NO-sensor compatability pack an amperometric add-on for O2k-MultiSensor application.

Product ID: 12500-02

Description

An amperometric add-on for O2k-MultiSensor application (NO, H2S, H2O2).

 

Configuration

The O2k-NO Amp-Module includes:

2 black MultiSensor PEEK Stoppers for amperometric O2k-MultiSensor application (NO, H2S, H2O2)
central titration port
1 additional 2.3 mm inlet
conical bottom; including Volume-Calibration Rings (A or B)
2 mounted O-rings (O-ringViton12.5×1 mm) on each stopper with 12 spare O-rings (O-ringViton12.5×1 mm; two boxes)

The NO sensor is not included.

Sensors are available from World Precision Instruments (WPI) Oroboros Instruments provides this information without comment or liability with regards to the material quality, or the suitability of these sensors for any particular application.
The Oroboros O2k (Series E upwards) is fully equipped with the necessary electronics to record signals from additional amperometric sensors. O2k-Multisensor options of O2k Series A to D are explained in the O2k-Manual (MiPNet15.05 NO-manual).
NO and other amperometric sensors from WPI: The O2k amperometric plug fully matches the WPI 2 mm sensor series for measuring NO (ISO-NOP), H2O2 (ISO-HPO-2) and H2S (ISO-H2S-2). These sensors are equipped with membranes of different thickness. The O2k stopper as listed above accommodates all three types.
Oroboros Instruments does not offer and deliver products from WPI. The restricted warranty period offered by WPI is incompatible with our high standard of user support.

Bioblast resources

This link will take you to the Bioblast page for this product where you will find manuals, guides and other relevant information.

O2k-NO amp-Module