Spare parts & consumables
To order any spares, please give the name and product ID number in the message of your quote request form.
| Product | Description | Product ID | Image |
|---|---|---|---|
| O2k-Catalogue: O2k-Assembly Kit | 21### O2k-Assembly Kit: The O2k-Assembly Kit is a component of the O2k-FluoRespirometer, consisting of 2 PVDF Stirrer-Bars, 2 PVDF or PEEK O2k-Stoppers, OroboPOS-Connectors (attached to the O2k-Main Unit) and cables (power supply, USB-connection). Several components of the O2k-Catalogue: O2k-Assembly Kit are included in the O2k-Service Box either for shipment or for storage. | 21### | |
| OroboPOS-Connector | OroboPOS-Connector (blue POM), with male connection to OroboPOS sensor head (POS) and with cable and male plug fitting into O2k-Main Unit. Two units of this item are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer), mounted on the OroboPOS-Holders at the O2k-Main Unit. | 22200-01 |  |
| OroboPOS-Holder | The OroboPOS-Holder (POS-Holder), made from blue POM, is screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. Two units of this item are standard components mounted on the O2k-Main Unit. | 22300-01 |  |
| O2k-Chamber | O2k-Chamber: 16 mm inner diameter, Duran glass polished, with standard operation volume (V) of 2 cm3 (2 mL). Two units of this item are standard components of the O2k-FluoRespirometer. Separate glass chambers are available as spares. The optical properties of Duran allow application of fluorometric sensors (Duran optical properties). | 23100-01 |  |
| Stirrer-Bar\white PVDF\15×6 mm | Stirrer-Bar\white PVDF\15×6 mm, operated in the O2k-Chamber at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium. Two units of this item are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer).O2k-FluoRespirometer: 2 in O2k-Assembly Kit. | 23210-01 |  |
| Stirrer-Bar\black PEEK\15×6 mm | Stirrer-Bar\black PEEK\15×6 mm, for specific applications with light guides to minimize optical interference. | 23220-01 |  |
| Stopper\black PEEK\conical Shaft\central Port | Stopper\black PEEK\conical Shaft\central Port: with conical shaft and one central capillary (with PTFE, graphite, carbon fiber), Volume-Calibration Ring (A or B) for volume adjustment 1.5 to 3.2 ml; 2 mounted O-rings, with 8 spare O-rings (O-ring\Viton\12.5×1 mm). The black PEEK stoppers are required for optical O2k-MultiSensor Modules (O2k-Fluo_LED2-Module). Two units of this item are standard components of the O2k-Assembly Kit. | 24000-01 |  |
| O-ring\Viton\12.5×1 mm | O-ring\Viton\12.5×1 mm, for PVDF or PEEK O2k-Stoppers, box of 8 as spares. Two spare boxes of this product are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer) as well as the O2k-TPP+ ISE-Module, O2k-pH ISE-Module and the O2k-NO Amp-Module. | 24310-02 |  |
| Volume-Calibration Ring | Volume-Calibration Ring (A or B) PVDF for O2k-Stoppers, white; attached to the stoppers. | 2432A-01 or 2432B-01 |  |
| Screwdriver allen wrench | Screwdriver allen wrench, a standard component of the OroboPOS-Service Kit and O2k-sV-Module. | 24330-02 |  |
| Cover-Slip\black | A Cover-Slip should be placed on top of the O2k-Stopper to minimize contamination and evaporation of liquid extruding from the capillary of the stopper. The Cover-Slips do not exert any direct effect on oxygen backdiffusion into the O2k-Chamber. Use the the Cover-Slip\black to avoid light penetration and disturbance of fluorescence signals and generally for optical measurements in the O2k. Two units of this item are standard components of the O2k-Assembly Kit. | 24411-01 |  |
| Stopper-Spacer | Stopper-Spacer (or gas spacer) to set the O2k-Stopper into a standard position for a fixed gas phase above the aqueous phase in the O2k-Chamber, during air calibration or for injection of nitrogen, argon or oxygen into the gas phase; Stopper-Spacer thickness of 4mm (a deviation of +/- 10% possible). One Stopper-Spacer is included in the O2k-Assembly Kit (O2k-FluoRespirometer), two in the O2k-TPP+ ISE-Module as standard components. | 24420-01 |  |
| Syringe\60 ml\Gas-Injection | Syringe\60 mL\Gas-Injection, 60 mL, with spacer and stainless steel needle, flat tip, for gas injection into the O2k-Chamber. This item is a standard component of the O2k-Assembly Kit. | 24430-01 |  |
| OroboPOS | The OroboPOS is a polarographic oxygen sensor (POS), with an amperometric mode of operation. The OroboPOS meets the highest quality criteria in terms of linearity, stability and sensitivity of the signal. The Clark type polarographic oxygen sensor (POS) remains the gold standard for measuring dissolved oxygen in biomedical, environmental and industrial applications over a wide dynamic oxygen range. It consists of a gold cathode, a silver/silverchloride anode and a KCl electrolyte reservoir separated from the sample by a 25 µm membrane (FEP). The main body of the OroboPOS is made of PEEK. With application of a polarization voltage (0.8 V), a current is obtained as an amperometric signal, which is converted to a voltage. | 26000-01 |  |
| OroboPOS-Seal Tip | OroboPOS-Seal Tip, black butyl rubber gasket with 3 mm pore. 4/Pck, for sealing the OroboPOS (sensor head) against the O2k-Chamber. Push the wetted OroboPOS-Seal Tip over the POS-sensor head, with the pore positioned centrally, not covering any peripheral area of the gold cathode. Do not stretch the gasket across the POS-sensor head. One pack (4 seal tips) of this product is a standard component of the OroboPOS-Service Kit. | 26110-01 |  |
| OroboPOS-Membranes | OroboPOS-Membranes, FEP 25 µm; 40/Pck. Two packages of this item are standard components of the OroboPOS-Service Kit. | 26200-01 |  |
| OroboPOS-Electrolyte Powder | OroboPOS-Electrolyte Powder, KCl.This item is a standard component of the OroboPOS-Service Kit. The powder is dissolved in 10 ml distilled water to yield a 1 M KCl solution. | 26300-01 |  |
| OroboPOS-Mounting Tool | OroboPOS-Mounting Tool for application of OroboPOS-Membranes. It consists of two parts, (i) the membrane guide (larger diameter) and (ii) the membrane ring holder with O-ring\Viton\6×1 mm for holding the OroboPOS-Membrane Ring during membrane application. This item is a standard component of the OroboPOS-Service Kit. | 26400-02 |  |
| OroboPOS-Polishing Cloth | OroboPOS-Polishing Cloth for cathode cleaning. Replace the OroboPOS-Polishing Cloth at intervals. A two-year interval may be considered in cases of intensive use. This item is a standard component of the OroboPOS-Service Kit. | 26510-01 |  |
| OroboPOS-Polishing Powder | OroboPOS-Polishing Powder for cathode cleaning. This item is a standard component of the OroboPOS-Service Kit. | 26520-01 |  |
| O2-Zero Powder | O2-Zero Powder, dithionite (Na2S2O4), for zero-oxygen calibration of the OroboPOS. This item is a standard component of the OroboPOS-Service Kit. | 26600-01 |  |
| Forceps for membrane application | Forceps for membrane application: for OroboPOS and ISE membrane application; do not use for tissue preparation. This item is a standard component of the OroboPOS-Service Kit and the O2k-TPP+ ISE-Module. | 26700-01 |  |
| Pipette\Plastic\1 ml ungraded | Pipette\Plastic\1 mL ungraded, for filling electrolyte into the reservoir of the OroboPOS. This item is a standard component of the OroboPOS-Service Kit. | 26800-01 |  |
| ISS-Waste Bottle | ISS-Waste Bottle, 2-liter, component of the ISS-Integrated Suction System. | 28120-01 |  |
| ISS-Lid | ISS-Lid, for ISS-Waste Bottle, component of the ISS-Integrated Suction System. | 28130-01 |  |
| ISS-Filter and Tubing | ISS-Filter and Tubing, ISS-Integrated Suction System. | 28140-01 |  |
| Power O2k Numbers | Power O2k Numbers: Single number to label the O2k in a Power O2k-Lab. | 28200-01 |  |
| Titration-Injection microPump | Titration-Injection microPump (TIP2k) for two-channel operation with the O2k with automatic control by DatLab of programmable titration regimes and feedback control (oxystat, pH-stat). Included in the TIP2k-Module. | 31000-01 |  |
| Microsyringe\500 mm3\TIP2k | Microsyringe\500 mm3\TIP2k: Microinjection syringe for Titration-Injection microPump, 500 mm3 (µl), fixed injection needle with rounded tip, with spacers. | 31210-01 |  |
| Microsyringe\200 mm3\TIP2k | Microsyringe\200 mm3\TIP2k: Microinjection syringe for Titration-Injection microPump, 200 mm3 (µl), fixed injection needle with rounded tip, with spacers. Four units of this item are standard components of the TIP2k-Module. | 31220-01 |  |
| TIP2k-Needle Spacer | TIP2k-Needle Spacers for microinjection TIP2k needle, silicone stops (200/Pkg.) with mounting tool. This item is a standard component of the TIP2k-Module. | 31310-01 |  |
| TIP2k Filter Papers | TIP2k Filter Papers (package of 10) to be used for the stoppers during TIP2k titration for Instrumental oxygen background correction to avoid constant manual siphoning off of extruded liquid. One package is a standard component of the TIP2k-Module. | 31320-01 |  |
| TIP2k-Needle Safety Support with cable guide | TIP2k-Needle Safety Support with cable guide: for safe storage of TIP2k-needles and MultiSensor Modules calbes when not required during the experiment. This item is a standard component of the TIP2k-Module, O2k-TPP+ ISE-Module, O2k-pH ISE-Module. | 31330-02 |  |
| O2k-Chamber sV | O2k-Chamber sV: 12 mm inner diameter, Duran glass polished, with standard operation volume (V) of 0.5 cm3 (0.5 mL). Two units of this item are standard components of the O2k-sV-Module. | 33100-01 |  |
| Stirrer-Bar sV\white PVDF\11.5×6.2 mm | Stirrer-Bar sV\white PVDF\11.5×6.2 mm, operated in the O2k-Chamber sV at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium. Two units of this item are standard components of the O2k-Chamber sV. | 33210-01 |  |
| Stopper sV\black PEEK\conical Shaft\central Port | Stopper sV\black PEEK\conical Shaft\central Port: with conical shaft and one central capillary (with PTFE, graphite, carbon fiber), Volume-Calibration Ring sV (A or B) for volume adjustment 0.5 ml; 2 mounted O-rings (O-ring sV\Viton\9.5×1 mm). Two units of this item are standard components of the O2k-sV-Module. | 34000-01 |  |
| O-ring sV\Viton\9.5×1 mm | O-ring sV\Viton\9.5×1 mm, for PEEK Stopper sV, 2 are mounted on each PEEK Stopper sV, box of 8 as spares. Three spare boxes of this product are standard components of the O2k-sV-Module. | 34310-02 |  |
| Volume-Calibration Ring sV | Volume-Calibration Ring sV (A or B), white PVDF, attached to PEEK O2k-Stopper sV. | 3432A-01 or 3432B-01 | |
| ISE Package 1 TPP or Ca | O2k-TPP+ and Ca2+ ISE\1 Chamber: ISE-Package for 1 TPP+ and Ca2+ electrode. | 42010-01 |  |
| Stopper\black PEEK\angular Shaft\side+6.2+2.6 mm Port | Stopper\black PEEK\angular Shaft\side+6.2+2.6 mm Port, for application with ISE; side titration port and two additional holes (6.2 mm and 2.6 mm); angular bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings, with 8 spare O-rings (O-ring\Viton\12.5×1 mm). Two stoppers are included in O2k-TPP+ ISE-Module. | 42100-01 |  |
| Stopper-Needle | Stopper-Needle: Short needle for bubble extrusion from port of the ISE-stopper. | 42120-01 |  |
| Ion-Selective Electrode TPP+ and Ca2+ | Ion-Selective Electrode TPP+ and Ca2+: ISE with 6 mm outer diameter shaft, for Stopper\white PVDF\angular Shaft\side+6.2+2.6 mm Port. O2k-TPP+ ISE-Module: 2 ISE. | 42200-01 |  |
| ISE-Inner Glass Electrode | ISE-Inner Glass Electrode of ISE, with Ag/AgCl- and Pt-wire | 42212-01 |  |
| ISE-Membrane Seal | ISE-Membrane Seal for Ion-Selective Electrode TPP+ and Ca2+. | 42213-01 |  |
| ISE-Compressible Tube | ISE-Compressible Tube for Ion-Selective Electrode TPP+ and Ca2+. | 42214-01 |  |
| ISE-Consumables Spares Set | ISE-Consumables Spares Set | 42250-01 |  |
| ISE-TPP+ Membranes | ISE-TPP+ Membranes, PVC, 4 mm diameter, box of 5 membranes. O2k-TPP+ ISE-Module: 2 boxes per electrode. | 42270-01 |  |
| ISE-Ca2+ Membranes | ISE-Ca2+ Membranes: PVC, 4 mm diameter, box of 5 membranes. To be used with the O2k-TPP+ ISE-Module. The ISE-Ca2+ Membranes have to be ordered separately. | 42280-01 |  |
| ISE-Membrane Mounting Tool | ISE-Membrane Mounting Tool for Ion-Selective Electrode TPP+ and Ca2+. O2k-TPP+ ISE-Module: mounting tool included. | 42300-01 |  |
| ISE-Filling Syringe | ISE-Filling Syringe with needle for Ion-Selective Electrode TPP+ and Ca2+. | 42310-01 |  |
| Reference-Electrode\2.4 mm | Reference-Electrode\2.4 mm: 2.4 mm diameter glass shaft, for ISE. | 42400-01 |  |
| Replacement-Barrel | Replacement-Barrel for Reference-Electrode\2.4 mm, 2.4 mm diameter glass. | 42401-01 |  |
| Electrolyte\Reference-Electrode | Electrolyte\Reference-Electrode for Reference-Electrode\2.4 mm | 42402-01 |  |
| Stopper\black PEEK\conical Shaft\central+2.3+2.6 mm Port | Stopper\black PEEK\conical Shaft\central+2.3+2.6 mm Port: for pH and reference electrode, central titration port and two additional ports (2.3 mm and 2.6 mm); conical bottom; including Volume-Calibration Ring (A or B), 2 mounted O-rings, with 8 spare O-rings (O-ring\Viton\12.5×1 mm). Two stoppers are included in the O2k-pH ISE-Module. | 43100-01 |  |
| PH-Glass electrode | pH-Glass electrode with BNC plug. Two pH electrodes are included in the O2k-pH ISE-Module. | 43200-01 |  |
| Fluorescence-Sensor Green | Fluorescence-Sensor Green: excitation LED 525 nm (dominant wavelength), photodiode, Filter-Cap equipped with Filter Set AmR for Amplex UltraRed measurements when delivered. Two units of this item are standard components of the O2k-Fluo LED2-Module. | 44210-01 |  |
| Smart Fluo-Sensor Green | Smart Fluo-Sensor Green: Excitation LED 525 nm (dominant wavelength) with short pass filter, emission (red) with long pass filter, individual sensors are calibrated with sensor-specific memory and direct input into DatLab 7 to obtain reproducible light intensities with different sensors, including photodiode, Filter-Cap equipped with Filter Set AmR for Amplex UltraRed and TMRM measurements when delivered. Two units of this item are standard components of the O2k-FluoRespirometer and the O2k-Fluo Smart-Module. Smart Fluo-Sensors can be used with O2k-Series H and higher. | 44212-01 |  |
| Fluorescence-Sensor Blue | Fluorescence-Sensor Blue: excitation LED 465 nm (dominant wavelength), photodiode, Filter-Cap equipped with Filter Set Saf for measurement of mitochondrial membrane potential with Safranin when delivered. Filter sets for Magnesium green® / Calcium green® measurements are included. Two units of this item are standard components of the O2k-Fluo LED2-Module. | 44220-01 | |
| Smart Fluo-Sensor Blue | Smart Fluo-Sensor Blue: Excitation LED 465 nm (dominant wavelenght) with short pass filter, emission (red) with long pass filter, individual sensors are calibrated with sensor-specific memory and direct input into DatLab 7 to obtain reproducible light intensities with different sensors, including photodiode, Filter-Cap equipped with Filter Set Saf for measurement of mitochondrial membrane potential with safranin and rhodamine 123. Filter Set MgG / CaG for Magnesium green and Calcium green measurements are included. Two units of this item are standard components of the O2k-FluoRespirometer and the O2k-Fluo Smart-Module. Smart Fluo-Sensors can be used with O2k-Series H and higher. | 44222-01 | |
| Filter-Cap | Filter-Cap: O2k-Fluo LED2-Module (O2k-Series D to G) sensors (Fluorescence-Sensor Green and Fluorescence-Sensor Blue) and O2k-FluoRespirometer (O2k-Series H) sensors (Smart Fluo-Sensor Green and Smart Fluo-Sensor Blue) are equipped with a removable Filter-Cap for exchange of optical filters for the optical pathways from the LED to the sample and from the sample to the photodiode. | 44310-01 |  |
| Filter Set AmR | Filter Set AmR: Set of filters for the determination of H2O2 production with Amplex UltraRed. These filters should be used together with Fluorescence-Sensor Green. The filter set consists of 6 LED filters (round) and 6 photodiode filters (rectangular). One pair of these filters is attached to Fluorescence-Sensor Green or Smart Fluo-Sensor Green when delivered as part of the O2k-Fluorescence LED2-Module or O2k-Fluo Smart-Module. One filter set is a standard component of the O2k-Fluorescence LED2-Module, O2k-Fluo Smart-Module and O2k-FluoRespirometer. | 44321-01 | 
|
| Filter Set Saf | Filter set Saf: Set of filters for the (qualitative) determination of mitochondrial membrane potential with Safranin. These filters should be used together with Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue. The filter set consists of 6 LED filters (round) and 6 photodiode filters (rectangular). One pair of these filters is attached to Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue when delivered as part of the O2k-Fluorescence LED2-Module or O2k-Fluo Smart-Module. One filter set is a standard component of the O2k-Fluorescence LED2-Module, O2k-Fluo Smart-Module and O2k-FluoRespirometer. | 44322-01 | 
|
| Filter Set MgG / CaG | Filter set MgG / CaG: Set of filters for the determination of concentraions of Mg2+ or Ca2+ with the fluorophores Magnesium green and Calcium green, respectively. These filters should be used together with Fluorescence-Sensor Blue or Smart Fluo-Sensor Blue. The filter set consists of 6 LED filters (round) and 6 photodiode filters (rectangular). One filter set is a standard component of the O2k-Fluorescence LED2-Module, O2k-Fluo Smart-Module and O2k-FluoRespirometer. | 44323-01 | 
|
| Stopper\black PEEK\conical Shaft\central Port\peripheral 2.3 mm Port | Stopper\black PEEK\conical Shaft\central+peripheral 2.3 mm Port: for potentiometric O2k-MultiSensor applications (NO, H2S, H2O2); 1 additional port (2.3 mm); central titration port; conical bottom; including Volume-Calibration Ring (A or B); 2 mounted O-rings, with 8 spare O-rings (O-ring\Viton\12.5×1 mm). O2k-MultiSensor: two stoppers in O2k-NO Amp-Module. | 46100-01 |  |
| Microsyringe\10 mm3 51/0.13 mm | Hamilton Microsyringe\10 mm3 51/0.13 mm for manual titrations, 10 mm3 volume; fixed injection needle with rounded tip: 51 mm length, 0.13 mm inner diameter. O2k-FluoRespirometer and Startup O2k-Respirometer: 6 included in the O2k-Titration Set. | 51010-01 |  |
| Plunger\10 mm3 | Plunger\10 mm3 for Microsyringe\10 mm3 51/0.13 mm, spare. O2k-FluoRespirometer and Startup O2k-Respirometer: 3 in O2k-Titration Set. | 51011-01 |  |
| Microsyringe\25 mm3 51/0.15 mm | Hamilton Microsyringe\25 mm3 51/0.15 mm for manual titrations, 25 mm3 volume; fixed needle with rounded tip: 51 mm length, 0.15 mm inner diameter. O2k-FluoRespirometer and Startup O2k-Respirometer: 6 in O2k-Titration Set. | 51025-01 |  |
| Microsyringe\50 mm3 51/0.15 mm | Hamilton Microsyringe\50 mm3 51/0.15 mm for manual titrations, 50 mm3 volume; fixed needle with rounded tip: 51 mm length, 0.15 mm inner diameter. O2k-FluoRespirometer and Startup O2k-Respirometer: 2 in O2k-Titration Set. | 51050-01 |  |
| Microsyringe\100 mm3 51/0.41 mm | Hamilton Microsyringe\100 mm3 51/0.41 mm for manual titrations, 100 mm3 volume; fixed needle with rounded tip: 51 mm length, 0.41 mm inner diameter. It is recommended for injections of suspensions of isolated mitochondria. O2k-FluoRespirometer and Startup O2k-Respirometer: 1 included in the O2k-Titration Set. | 51100-01 | |
| Syringe\500 mm3 51/0.41 mm | Hamilton Syringe\500 mm3 51/0.41 mm for manual titrations, 500 mm3 volume; fixed needle with rounded tip: 51 mm length, 0.41 mm inner diameter; for injections of suspensions of isolated mitochondria and filling of the Microsyringe\200 mm3\TIP2k. O2k-FluoRespirometer and Startup O2k-Respirometer: 1 included in the O2k-Titration Set. | 51500-01 |  |
| Syringe Racks | Syringe Racks: stainless steel; for proper placement of eight Hamilton microsyringes in HRR experiments; package of two (for a total of 16 microsyringes). One package of two Syringe Racks and two Tube Racks is a standard component of the O2k-Titration Set. | 51610-01 |  |
| Syringe Collars | Syringe Collars (package of 20) for Hamilton microsyringes: for correctly storing the microsyringes in the Syringe Racks. One package is a standard component of the Syringe Racks. | 51611-01 |  |
| Tube Racks | Tube Racks: stainless steel, accomodating four 50-ml tubes, for cleaning of microsyringes, cleaning and storage of stoppers during cleaning of the O2k-Chambers; package of two (for a total of eight tubes). One package of two Tube Racks and two Syringe Racks is a standard component of the O2k-Titration Set. | 51620-01 |  |
| Syringe Storage Box | Syringe Storage Box: for storing the Hamilton microsyringes; incl. Syringe Labels, MiPNet19.14 SOP Hamilton microsyringes and MiPNet09.12 O2k-Titrations. One item is a standard component of the O2k-Titration Set. | 51630-01 |  |
| Syringe Labels | Syringe Labels: set of labels with standard abbreviations (see O2k-Titrations). One set of labels is a standard component of the Syringe Storage Box. | 51631-02 |  |
| Titration Set Upgrade | The Titration Set Upgrade consists of the new items of the O2k-Titration Set for upgrading your original set (consisting only of Hamilton microsyringes). The upgrade consists of the Syringe Storage Box with Syringe Labels, a set of two Syringe Racks with Syringe Collars, and a set of two Tube Racks including tubes as well as an additional syringe (1 x 100 mm3). | 51910-01 | 
|
| PBI-Shredder SG3 | PBI-Shredder SG3 for tissue homogenate preparation, heavy duty high torque SG3 driver with convertible handle, SG3 base with 3 position force setting lever (FSL), battery charger and two lithium ion batteries. The PBI-Shredder SG3 is included in the PBI-Shredder O2k-Set. Select 230 V or 120 V. Oroboros Instruments: world-wide distributor. | 52100 |  |
| Shredder-Tubes | Shredder-Tubes: consisting of Shredder Tube FT500-PS with Lysis Disk, serrated Shredder-Ram and Shredder-Screw Cap, coral colour (Box of 100) and Shredder Tube FT500-PMS with Lysis Disk, serrated Shredder-Ram and Shredder-Screw Cap, coral colour (Box of 100). There is no difference between the white and the coral shredder tubes, except that the white tubes are also approved for high pressure. 1 box of each is included in the PBI-Shredder HRR-Set. | 52210-01, 52220-01 |  |
| Microbalance-Transport Case | Microbalance transport case, not suitable for shipping | 53300-01 |  |
| Forceps\stainless Steel\straight Tip\sharp | Forceps\stainless Steel\straight Tip\sharp: for tissue preparation, stainless steel, antimagnetic. One pair is recommended for insertion of the sample into the O2k-Chamber and for handling in combination with Forceps\stainless Steel\rounded Tip\sharp. Set: in O2k-Dissection Set and PBI-Shredder O2k-Set. | 54210-01 |  |
| Forceps\stainless Steel\rounded Tip\sharp | Forceps\stainless Steel\rounded Tip\sharp: for tissue preparation, stainless steel, antimagnetic. One pair is recommended for placing the tissue sample onto the microbalance and for handling in combination with Forceps\stainless Steel\straight Tip\sharp. Set: in O2k-Dissection Set. | 54220-01 |  |
| Forceps\stainless Steel\angular Tip\fine | Forceps\stainless Steel\angular Tip\fine: for tissue preparation, stainless steel. Two pairs are used particularly for muscle fibre separation. Set: 2 in O2k-Dissection Set. | 54230-01 |  |
| Scissors\stainless steel\straight Tip\sharp | Scissors\stainless steel\straight Tip\sharp, included in PBI-Shredder O2k-Set and O2k-Dissection Set. | 54310-01 |  |
| Packing\O2k-Box 1 | Packing\O2k-Box 1: for shipment of the O2k-Main Unit, with polystyrene inlets. Keep the original packing material safely stored, for any future shipping purposes of the O2k-Main Unit. | 99010-01 |  |
| Packing\Peli Case | Packing\Peli Case: Watertight, crushproof, and dust proof case for safe transportation of the O2k:Retractable extension handle, Strong polyurethane wheels with stainless steel bearings, Easy open Double Throw latches, Open cell core with solid wall design – strong, light weight, O-ring seal, Automatic Pressure Equalization Valve, Fold down handles, Stainless steel hardware and padlock protectors, 4 level Pick N Pluck™ with convoluted lid foam, Special foam inlets for O2k. Interior Dimensions: 21.48″ x 16.42″ x 12.54″ (54.5 x 41.7 x 31.8 cm) | 99012-01 |  |
| Packing\O2k-Box 2 | Packing\O2k-Box 2, for shipment of accessories. | 99020-01 |  |
| O2k-Main Power Cable | O2k-Main Power Cable, either O2k-Main Power Cable\230 V\Europe, O2k-Main Power Cable\120 V\US-CA, or O2k-Main Power Cable\230 V\AU-NZ. This item is standard component of the O2k-Assembly Kit (O2k-Core). | 21110 | |
| O2k-Main Power Cable\230 V\Europe | O2k-Main Power Cable\230 V\Europe. An O2k-Main Power Cable is included in the O2k-Assembly Kit. | 21111-01 |  |
| O2k-Main Power Cable\120 V\US-CA | O2k-Main Power Cable\120 V\US-CA, USA and Canada (120 V). An O2k-Main Power Cable is included in the O2k-Assembly Kit. | 21112-01 |  |
| O2k-Main Power Cable\230 V\AU-NZ | O2k-Main Power Cable\AU-NZ, Australia and New Zealand (230 V). An O2k-Main Power Cable is included in the O2k-Assembly Kit. | 21113-01 |  |
| USB-Cable 2.0\Type A-B | USB-Cable 2.0\Type A-B for connecting the O2k-Main Unit (O2k-Series E upwards) to the USB port of a PC or laptop. This item is a standard component of the O2k-Assembly Kit (O2k-FluoRespirometer). | 21230-01 |  |
| O2k-Fuse Power Plug\M2.5 A\5×20 mm | O2k-Fuse Power Plug\M2.5 A\5×20 mm: This item is a standard component of the O2k-Assembly Kit (O2k-FluoRespirometer), mounted on the socket for the O2k-Main Power Cable, at the rear panel of the O2k-Main Unit. | 22510-01 |  |